Hot runner assembly
▂▂▂▂▂▂
1. The assembly of maintenance products is completed within 1.5 hours.
2, the maintenance team leader according to the actual needs to arrange the hot nozzle assembly, after the assembly of the maintenance products self-inspection, such as: product total height; Hot nozzle grounding and power-on detection; Test the heat.
3, maintenance products need to be delivered to the installation of the test mold within 3 hours to reach the client, after-sales engineers should inform the salesman to repair products to reach the customer time, the salesman can communicate with customers in advance to prepare for the test mold.
4, the repair products have a quote, the after-sales project in the delivery at the same time also to bring the delivery note, the delivery note signed by the client, on behalf of the maintenance product customer received, back to the company after the bottom of the single to the industry assistant.
5. When the maintenance products are sent to the customer, the maintenance team leader will pack the maintenance products at the door of the warehouse, and notify the industry assistant to arrange the shipment. For out-of-province maintenance of the shunt plate or the weight of more than 20KG of products must be packed in wooden cases, in the process of transportation can withstand the weight of the shunt plate and collision. The outlet part of the shunt plate and the space of the board should be more than 20MM to avoid the fixing screw of the shunt plate loosening and damaging the heating pipe. The maintenance products in the province can be packed in the actual situation to ensure that the parts will not be damaged during transportation.
